Black Widow - Mods

spitfire_pt

Member
New things coming soon:

Here is my DN-01 naked :(





Led Handguards


LEDs instalation


Front LEDs


Side LEDs
 
Last edited:




spitfire_pt

Member
and the show goes on:


Carbon Fiber Tank Pad


Limited Edition Emblem Chrome


Also very SOON for only 70€ second hand

GIVI TopCase 45L


 




spitfire_pt

Member
EVERYTHING went together well!
almost everything, couple of issue i need to fix.

1 - Led lights stopped working and haven't figured out why

2- new GIVI topcase, i am using the Honda original support that i had on my previous topcase and because of that passenger as less space to seat

still considering after some test driving if i will change and use the other support i have witch as the side cases or keep it like this. depends on wife comfort.

Using honda original support gives me the chance to change topcase in a flash, if i have to do use the other i am stuck to givi only.

Besides that all ok.

Still a couple of more projects and i will be done
 

spitfire_pt

Member
Just a simple strip that changes the all look of the bike

Front


Rigth Side tank


Rigth Side


Left Side tank


Left Side tank
 

spitfire_pt

Member
And also extra Foot peg for the passenger (gives her more relax position while traveling)


Rigth Side Passenger Peg


Left Side Passenger Peg
 
Last edited:

spitfire_pt

Member
Extras of the day :)


Tank Protector + Helmet with Plasti Dip (red) + SJCAM M20


New GPS support with USB Charger



Rear USB Charger for my wife (installed on brackets for side bags)


Helmet Intercoms with FM radio



New Facial Mask




Helmet + two SJCAM M20 support (top and right side)



i know i know, need a RED jacket instead of this green :)
 


Overthehill

New member
Man...you 2 will be out there on the highway cruising like a king and queen!!!
2 questions for you , if I may.
Can you post a couple of photos of your gps mount.
I looked thru the vids and photos but couldn't see the mounting.
Also can you provide the details of the headlight globes you have installed.
I installed some xenons on my FJR...wow what a difference and with the driving lights I can see all the way to christmas.
Might put some led drivers on the dino as in winter if I get up early for a day ride it's dark for a couple of hours when I leave and for an hour or so on the way back.
Gotta watch out for those darn kangaroos, they are deadly!!
Thanks in advance for any info
cheers
Pete
 


spitfire_pt

Member
hi,Overthehill,

the GPS mount you can buy HERE, very easy to install and it look great where i put it.

this mount is not in Video yet, since its recent :)

The Ligths on my DN are:
2 halogéneo H11 de 5000k (xenon effect) (medium)
2 T10 Led white (minimuns)
1 H7 Philips Blue Vision (maximum)

This little changes in lights gave me more visibility at nigth, it was almost 50€ in lighting but i didnt had to anything else but replace old one with new ones

Regards
 

Overthehill

New member
Ola Spitfire
Sorry, my bad...
I have a Garmin "powered mount" for my GPS.
I was wondering how you actually attached the mount to the bike.
I think I can see some RAM parts, of which I have a box full from previous endeavors
There doesn't look to be much space for any brackets on the handlebar.
My bike is being delivered in the morning so I will be able to have a closer look.
I had an idea to work off the crossbar from under the handlebar cover with my RAM parts and have the gps sitting front and center rather than off to one side.
That might involve trimming out part of the cover, but it wouldn't be seen.
Lots of fun (and frustration) to be had working out where to put things and how to enable it.
Thanks for the info on the light globes.
I get the H11's for the low beam and the H7 for the high beam.
What are the 2 T10's for and where do they fit??
Thanks again for the help
cheers
Pete
 

spitfire_pt

Member
My GPS mount, either the one on the videos or this one is attached to the screws from the fluid Brake reservoir.

This new does not use RAM parts, but chinese look alike, 80% cheaper, some effect:)

Also its possible to have some fix to center it but that will be needed some cuting under the handlebar cover. since i try to do as minimal cuts on plastics as possible i uses this solution.

But i have the handlebar cover cuted under in case i want to install something else. i dont know yet what but something i will put there :D

once you open the globe you will see the T10, i´ve done it a while ago and dont recall exectly the spot

I will post a video of new mods all together this weekend.

Regards

Ola Spitfire
Sorry, my bad...
I have a Garmin "powered mount" for my GPS.
I was wondering how you actually attached the mount to the bike.
I think I can see some RAM parts, of which I have a box full from previous endeavors
There doesn't look to be much space for any brackets on the handlebar.
My bike is being delivered in the morning so I will be able to have a closer look.
I had an idea to work off the crossbar from under the handlebar cover with my RAM parts and have the gps sitting front and center rather than off to one side.
That might involve trimming out part of the cover, but it wouldn't be seen.
Lots of fun (and frustration) to be had working out where to put things and how to enable it.
Thanks for the info on the light globes.
I get the H11's for the low beam and the H7 for the high beam.
What are the 2 T10's for and where do they fit??
Thanks again for the help
cheers
Pete
 




Top