Recent content by Rodri75

Hello, I'm still waiting for time to put everything together. Greetings

Hello, it must be the same or less width because you have to install the retainers and only could be fitted in their exactly place (if it's less, search for a washer to match the final width). Regards, Rodrigo.

Any complete kit of gaskets could be good, but better find a reputable one. Don't forget the water pump joint (19226-MEH-000), flush and clean very well all the parts, apply molybdenum grease for all inner bearings. And what I told before, lot of patience to do all the handmade work with the...

I didn't find the exact measure with the 26x72x19 (ordered 30x72x19), so I must order a 26x30x18 bushing: He encontrado esto en AliExpress: Buje de acero para rodamientos con diámetro interior de 26/27/28/29/30/31/32 mm, manguito hueco redondo para eje, espaciador guía resistente al desgaste...

Another bearing (X2) https://amzn.eu/d/0dtpLNnO

Some more

Some pics of the broken bearings (54x90x18 & 26x72x19)

I take a few picks, not all, but I have all the parts needed in my case ATM, Let's see:

Hi, everyone, I'm actually rebuilding the HFT unit (2009, 144.000km) with new bearings and I use bushings (as sleeves) where you can't find the exact inner diameter. IMHO the worse part is that you have to take the motor out of the bike, split the crankcase in order to get all the HFT unit out...